SootLoose logo
Call
SootLoose logo

Chimney and Stove Installation

With an existing fireplace

Without an existing fireplace

NEW HOME FIRE SAFETY CHECK

If you already have an existing fireplace and chimney

The Survey Process
1. We perform a sweep and camera Survey of your existing flue. This is to clean away any soot and creosote deposits that could pose a fire risk after any installation has taken place.

2.Once cleaned we can also ascertain the condition of your existing chimney and check that there is a clear route to install a chimney lining system.

Call to book for just £175

Call Now

Once we are satisfied that your existing chimney is clean and suitable to accept a stainless steel liner we can then discuss the following;

  • Suitable access through your property to the fireplace in question.
  • Suitable roof access to the existing chimney stack / roof where the flue will terminate from. Most chimneys can be refined from ladder access however cherry picker / scaffold hire maybe required. We want to be able to access the chimney as safe as possible.
  • Suitable recess/fireplace opening size and we will discuss possible solid fuel appliances suitable for your needs.
  • If any structural work is required for the opening and/or repairs to your existing chimney
  • Take measurements of the existing opening or opening to be created and calculate the hearth requirements.
  • Ventilation requirements will also be discussed if necessary
  • The look of the fireplace. Will it have a surround or just a mantel?

An estimate for the works will be sent you within 1 week of the initial survey and this will be valid for two weeks from the date sent.
Once we have received your approval of the estimate in writing we would then request a 50% deposit that will be invoiced to you to secure the booking. The remaining balance can be settled on the day of completion and we will then notify your local building authority who in turn will send you a certificate of compliance in the post within 30 days.

Sound simple enough? Then click below to arrange a survey.

Call Now

Without an existing fireplace and chimney:

If you’ve found yourself buying a modern property with no fireplace then fear not, a fire you still shall have! No Chimney, No Problem.

In these circumstances we can install a Twin wall rigid flue system specially designed to fit either internally into your property or externally to a suitable stove of your choice providing it is eco design ready and compliant with the new 2022 clean air directive being implemented by government.

Why not call us to find out more?

Call Now

NEW HOME FIRE SAFETY CHECK: from £180

Picture this...
You’ve brought a home with a real fireplace, it may even have a stove in it! You can’t wait to get the essentials (bottle of wine) unpacked and celebrate your new chapter in front of a roaring fire. But how do you know if it is even safe to light an actual fire in the middle of your new home?

Time and time again we come across poorly fitted and in some cases dangerous installations that should have been picked up on homebuyer surveys but haven’t.

If you’ve recently moved into a property that has a solid fuel appliance and have not been supplied with a compliance certificate or any paperwork stating that the chimney or appliance have been maintained, then give us a call. If its an open fire, Multi-fuel stove, wood burner, open fire back boiler, solid fuel Rayburn / AGA cooker, we can offer a safety check service that will determine if it is fit for purpose and safe to use.
Any defects will be noted and remedial recommendations explained to you on the day and if needed we can send a quote to you for the works required to bring your existing appliance up to current regulations.

After our visit you’ll know more about what appliance you have, how it should be used, how to get the best out of it and if there are any remedial repairs to do and how best to go about doing them.

  • Inspect the appliance inside and out
  • Check all internal removeable parts of the stove or fireplace
  • Sweep and camera inspect the existing flue for soot and creosote deposits and any defects.
  • We will then perform a smoke evacuation and spillage test to ensure the correct flue draught is achieved for the appliance and that no products of combustion will spill out into the room during use.
  • We will then give you advice on what fuels should be used and the most efficient way to use them to get the most out of your appliance.
  • Ensure you have a working CO (carbon monoxide) alarm. If not we can supply you one at an additional £25.
  • Documentation will be provided of works carried out for your insurance purposes, with any recommendations.

Oil Boiler & Solid Fuel Stove Installation

Oil Boiler Service from £130

What can SootLoose do for your oil boiler or stove installation....
SootLoose can offer servicing and repairs of domestic Stage 1 Pressure jet oil boilers, issue landlord safety certificates and is fully qualified and insured to ensure your oil heating system is working to its full potential.

We also help with woodburning stove installations as professional HETAS engineers and installers.

OIL BOILER SERVICE INCLUDES:

  • Inspect Oil Storage Tank
  • Replace oil filter element.
  • Check operation of remote fire valve**
  • Fully remove & clean baffles and clean combustion chamber of soot deposits.
  • Replace burner nozzle.
  • Replace one flexible oil line*** (if expiry date is before next service).
  • Clean & Set ignition electrodes.
  • Check & Set oil pump pressure.
  • Analyse and Set combustion mixture.
  • Check emergency shut-off safety function.
  • Provide full OFTEC service report.
  • Leave area clean and tidy.

* A boiler service usually takes up to 2 hours to complete. Additional time over 2 hours taken due to size or condition of the boiler, unforeseen operational issues are charged at£25/ 30 mins plus parts.

** Sometimes fire valves are found to be defective on the day of testing. The replacement cost is not covered in the service cost.

*** Additional flexi oil lines for tiger loop systems are supplied and fitted and are priced at £15.

Annual Chimney Sweeping Services

Read more about how we maintain and service your chimney on a yearly basis

Explore

Oil Servicing

Servicing, inspection and safety advice for all things oil based

read more
Concerned about the safety of your chimney?
Worried it's not up to insurance standards?
Looking for a quote on a modern stove installation?
Call Now
SootLoose logo
NACS Certified chimney sweep
HETAS registered installer
thatched roof

Get in Touch

07841 581 607
info@sootloose.co.uk

Navigate

Legal

Terms & Conditions
Terms of Use
Privacy Policy

Get in Touch

07841 581 607
info@sootloose.co.uk

Navigate

Legal

Terms & Conditions
Terms of Use
Privacy Policy

Copyright SootLoose 2021. All Rights Reserved.